No products
HX4-06006
IN STOCK
New product
72 Item Items
Power Selection Module
The power selection module is used to manage power to "The Cube" and the cubes accessories.
It takes up to three power sources in, USB and Main, and Backup, and it feeds this power to the correct locations.
It also takes Power from the Servo rail as a 4th power option for the RC Receiver, and the I/O chip.
Recipient :
* Required fields
or Cancel
Power inputs must be between 4.4v and 5.7v
Power output is the same voltage as the selected input.
Power can be taken off the PSM in different methods, allowing for different subsystems to fail gracefully.
This module also holds the Buzzer controller.
The Aux power input has a Zener clamping it to 5.6v, this zener is protected from continuous over voltages by a fuse and fet.
Presenting "the Cube"The cube is a full...
$250.0
Presenting "Blue Cube"The Blue cube is a full...
$600.0
Here 2 1.New Smart Chip2.Fast Switch to CAN...
$6,600.0
Already have a cube? Grab a carrier board to...
$128.0
$34.6
$22.2
$119.0
Support Ardupilot with these awesome tags!
$5.0
Here 2 1.New Smart Chip2.Fast Switch to CAN...
$330.0
Up to 8s 30A continuous
$27.0
$1,040.0
$128.0
$2,560.0
$300.0
$9,000.0
$275.0
$330.0
$3,300.0
$250.0
$1,750.0
$27.0
$540.0
$30.0
$15.0
$300.0
$300.0
$2.5
$250.0
$350.0
$5.0
$3.5
$500.0
$330.0
$15.0
$3.7
$81.0
$97.3
$81.0
$97.3
$199.0