No products
MH017
IN STOCK
New product
75 Item Items
Mauch 017: PL 4-6S BEC 2x5.35V 1x12.0V with CFK enclosure
Recipient :
* Required fields
or Cancel
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.
Blue power "ON' LED. (3x)
32mm x 50mm x 7mm / 19g without CFK enclosure
34mm x 52mm x 10mm / 24g with CFK enclosure
Scope of delivery:
1x PL-4-6S BEC 3x
1x CFK enclosure
1x Sensor cable (040) Molex Clik-Mate 4p / L = 150mm
1x Backup cable (050) for Pixhawk 2.1 / Molex Clik-Mate 2.0-6p / L = 150mm
1x 12.0V output cable one site Molex Clik-Mate 1.25mm-4p, the other site open. / L = 150mm
REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:
041: DF13-6p -> Pixhawk 1 / APM... etc.
042: Molex Clik-Mate 2.0 - 6p -> Pixhawk 2.1
043: JST-GH-6p -> Pixhawk 3... etc
Please use bank wire transfer for payment The...
$9,000.0
DF17 in carrier board. This is the connector...
$3.5
The primary purpose of the SpektreWorks...
$200.0
$128.6
$56.6
$6.0
$6.2
$190.0
$135.9
$38.3
$43.3
$40.8
$29.6
$50.5
$56.6
$95.9
$135.9
$135.9
$175.3
$3.7
$4.9
$128.6
$180.5
$242.0
$304.0
$17.1
$6.2
$6.9
$27.0
$6.2
$6.2
$27.0
$29.6
$29.6
$30.7
$6.2
$18.6
$22.2
$38.3
$42.2