No products
MH075
IN STOCK
New product
21 Item Items
Mauch 075: HS-200-LV
Recipient :
* Required fields
or Cancel
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 6S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry... etc.
Connected to the sensor are 2x10cm AWG10 wire (red) as a standard.
The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different length, then please order it separately.
$29.6
$52.0
$15.0
$242.0
Presenting "Blue Cube"The Blue cube is a full...
$600.0
The primary purpose of the SpektreWorks...
$4,000.0
$3.7
$6.2
$43.3
$18.6
$43.3
$40.8
$29.6
$50.5
$71.5
$56.6
$95.9
$135.9
$135.9
$175.3
$3.7
$4.9
$128.6
$180.5
$242.0
$304.0
$17.1
$6.2
$6.9
$27.0
$6.2
$6.2
$27.0
$29.6
$30.7
$6.2
$18.6
$22.2
$38.3
$42.2